Discover our new wireless loggers FoxNet, compliant with Thermotrack-Webserve.

FoxNet exists in 2 versions:

• FoxNet Temp, with 3 external digital temperature sensors (-55/+125°C ±0.5°C)
• FoxNet TH, with an internal temperature and humidity sensor (-40/+85°C 0/100%)

FoxNet loggers communicate wireless with a Controller that is plugged on a Ethernet network socket. The distance to the controller is up to 1000 m line of sight.

Data are transmitted to Thermotrack-Webserve. No change from this side.
Existing Sensor Net Connect can co exist with FoxNet. You do not need to replace them. It also use the same digital temperature sensors

Advantages of FoxNet :

• Installation more easy with the radio communication
• Works 24/7 with its 2 standard and log life 1.5V batteries
• 100% compliant with Thermotrack Webserve
• Can coexist with Sensor Net Connect already installed

For more details

• Visit the FoxNet page on our web site
• Download the PDF documentation
• Contact us by e-mail ou call us at +33 3 20 64 63 63

 

 

 

The highest sample rata has been changed to 5 minutes, so as to offer faster page load and give better visibility of graphs.

This change will be active on April 4th 2018 during the day

You might receive alarms for sensor not detected at approx 2 am (Paris time) since a couple of days.

You sensors are correctly detected and there is no loss of data.

The reason is that during backup processing during the night, our servers can’t accept too many incoming connections. During that time, your data are stored on your PC that hosts your Sensor Net Connect software and are sent later.

We are working on it so we can solve this very quick and we beg you to accept our apologize for the inconvenience.

Benoist Macé and Yann Dupont are at your disposal for any question

Many temperature excursions happen because of doors being left opened.
To avoid this, get our new door contact monitoring sensor to monitor doors of your fridges, freezers, cold rooms…
Easy to install, just the two contact to affix one on the door the other on the door frame, using the adhesive tape.
Connect the 4 meters cable to the Sensor Net Connect and set the time delay before it send an alarm to anyone by SMS, Email, Pop-Up, Siren

Need an offer. Contact your distributor or send a message to thermotrack@proges.com